Here is some info and pictures of a PA-22 Tri-Pacer project that Dave Stafford is currently building. Thanks Dave!
If anyone else has a project that they’re working on, please let me know so I can get it on the club website. You can contact me using the contact form on our site.
From Dave;
I saw your request for project photos, so here’s a few on the 6-foot span PA-22 Tri-pacer I’m currently building. The kit is manufactured by Mosquito Bite Airplanes of Canada and is about 90% plywood. This is my first attempt at a scale model and I must say that I’m reallyenjoying the build. About 3.5 months into it right now. Ready-to-fly weight should be about 9.5 lbs. Power will be a Rimfire .80 brushlessmotor with a 6S 5000 mAh LiPo battery. Plywood kits require lots of clamps!
See the 10/22/14 update here https://sloflyers.com/?p=3311
